Foam core SD6063 wings are sheeted in black polar, saving you lots of time. Fuselage is pre-painted in the mould and is made of strong glass fibre with kevlar and carbon re-inforcing. Loads of room in the fuselage, to allow big motors and batteries to be fitted.
Requires 3-4 micro servos, batteries, esc, receiver.
PLEASE EMAIL TO CHECK ON STOCK AVAILABILITY

---

Foam core SD6063 wings are sheeted in black polar, saving you lots of time. Fuselage is pre-painted in the mould and is made of strong glass fibre with kevlar and carbon re-inforcing. Loads of room in the fuselage, to allow big motors and batteries to be fitted.
Requires 3-4 micro servos, batteries, esc, receiver.
PLEASE EMAIL TO CHECK ON STOCK AVAILABILITY

---

Glass Fuse, poplar sheeted foam cores. Polyhedral or straight dihedral wings. SD7037 section. Pre cut tail surfaces. All hardware, instructions and CAD drawn plans. This is a 2-channel, polyhedral model suitable for thermal or slope flying. Two piece wing with steel wing joiner.
- wing span:2000mm - length: 1136mm - weight: 700g
More information...

As reviewed in Airborne Magazine #195 April 2004 Glass Fuse, poplar sheeted foam cores, Pre cut tail surfaces. V tail, ailerons, flaps, hardware, and CAD drawn plans.New models now feature flaps and a new, fast, MG06 airfoil. This is a 3-4 channel, aileron model suitable for thermal or slope flying. Two piece wing with brass tube and carbon rod wing joiner. Pre-cut servo wells and servo lead channels.
Wing span: 1970mm Length: 1136mm Weight: 800g
More information...

This is a 2-4 channel, aileron model which can be flown as an Open Class HLG, slope or thermal. Two piece wing with carbon fibre wing joiner. Pre-cut servo lead channels. All Mefisto models feature winglets as standard.
Wing span:1900mm - Length: 937mm - Weight: 450g - Wing profile: SD6063.
Model can be converted to electric using 400 to 480 type motors. Electric version nose is provided in the kit.
More information...

This is a 2-4 channel, aileron HLG model also suitable for slope and thermal flying.
Wing span: 1500mm - Length: 875mm - Weight: 370g - Wing profile: S6063.
Model can be converted to electric using 400 to 480 type motors. Electric version nose is provided in the kit.
More information...

This is a 2-channel, polyhedral HLG model also suitable for slope and thermal flying.
Wing span:1500mm - Length: 875mm - Weight: 350g - Wing profile: HN1033
Model can be converted to electric using 400 to 480 type motors. Electric version nose is provided in the kit.
More information...

This is a semi-scale model of the Polish aerobatic glider MDM-FOX. As usuall all parts are provided including the landing wheel. The model is intended for slope flying.
Wing span: 2100mm - Length: 1150mm - Weight: 1000g - Wing profile: RG15 modified
More information...

This is a 2-4 channel, aileron HLG model also suitable for slope and thermal flying.
Wing span: 1500mm - Length: 875mm - Weight: 370g - Wing profile: HN1033
More information...

This is a 2-6 channel, F3F aileron model with flaps. Two piece wing with steel wing joiner. Pre cut servo wells and servo lead channels. The new Hammer features winglets as standard.
Wing span: 2400mm - Length: 1200mm - Weight: 1400g - Wing profile: SD7012
Model can be converted to electric using 600 type motors. Electric version nose is provided in the kit.
More information...

This is a 4-6 channel, F3J model with ailerons and flaps. Three piece wing with steel wing joiners. Carbon fibre reinforcement of the entire fuselage. Pre-cut servo lead channels. V-tail has a symmetrical airfoil and a construction similar to wings i.e. black poplar over white foam. New HARPIA has winglets.
Wing span:2800mm - Length: 1350mm - Weight: 1800g Wing profile: S7012
There is no electric conversion for this model.
More information...

This is a 4-6 channel model whith ailerons and flaps. Three piece wing with steel wing joiners Carbon fibre reinforcement of the entire fuselage. Pre-cut servo lead channels. V-tail has a symmetrical airfoil and a construction similar to wings i.e. black poplar over white foam.
Wing span:3600mm - Length: 1350mm - Weight: 2150g - Wing profile: S7012
New VAMPIRE has winglets. There is no electric conversion for this model.
More information...

This is a semi-scale model of the Polish club glider SZD-30 Pirat. As usuall all parts are provided including the landing wheel. The model is suitable for slope and thermal flying.
Wing span: 1500mm - Length: 700mm - Weight: 370g - Wing profile: SD7037
More information...

click on this link for pilots impressions and reviews -