Vector Combat
The Vector Flying wing is available as either an EPP Leading Edge slope combat soarer, or as a Speed 400 Electric powered model.
Both models are based on the EH20120 airfoil.
The slope soarer offers manoueverability as well as a wide speed range in wind strengths from 5 knots through to 25 knots without the need for ballast. The airfoil is ideal for its intended purpose, and has full span, progressive washout cut into it, during manufacture.
The Vector assembles very quickly, using standard sized servos and a rectangular receiver pack of 4 cells. If a radio with no electronic mixing functions is to be used, then a separate mixer will also be required.
The kit contains 2 rolls of coloured packing tape, rods, clevises, horns, coreflute tiplets and elevons. You will also need sanding blocks, hobby knife or Dremel, small drill with 1.5mm bit, rule, small screwdrivers, epoxy, cross weave fibre reinforced filament tape, and 3M #77 spray adhesive, to finish your Vector. If you have difficulty sourcing electronic mixers, tapes, adhesive and other items, they are available from Airsports
P.O.Box 214 Sutherland NSW 1499 or email sales@airsportsrc.com.au