All shapes are turned down from mild steel before being coated with tungsten carbide. They come with an integral 3mm arbor, and are available in coarse or fine grit.They are suitable for use in Minicraft, Dremel, Flexi-drives and similar small drills. Run at low to medium speeds, Eye protection should be worn at all times.
 |
 |
 |
 |
 |
 |
|
RF-1F Narrow Cone Fine Grit...$23 RF-1C Narrow Cone Coarse Grit...$23 RF-2F Wide Cone Fine Grit...$23 RF-2C Wide Cone Coarse Grit...$23 RF-3F Drum Fine Grit...$23 RF-3C Drum Coarse Grit...$23 |
RF-4F Pancake Fine Grit...$23 RF-4C Pancake Coarse Grit...$23 RF-5F. .Domehead Fine Grit...$23 RF-5C ..Domehead Coarse Grit...$23 RF-6F. 3mm Rod Fine Grit...$23 RF-6C.3mm Rod Coarse Grit...$23 |
 |
 |
 |
 |
|
RF-7F .Inverted Cone Fine Grit...$23 RF-7C. Inverted Cone Coarse Grit...$23 RF-8F9mm Diameter Ball Fine Grit...$23 RF-8C9mm Diameter Ball Coarse...$23 |
RF-9UF.6mm Diameter Countersink Ultra-Fine Grit...$23 RF-10F .9mm Countersink Fine Grit...$23 RF-10UF.9mm Ultra-Fine Grit...$23 |
These tough cutting discs are made from mild steel with the tungsten grit welded to the edges. They will not break, and can cut through stainless steel, spring steel, as well as fibreglass etc.Each comes with a stainless steel 3mm arbor, locking washer and M3 nut
 RD1. .19mm disc with arbor...$19 |
 RD3 19/32mm discs with arbor...$34 |
 RD2 32mm disc with arbor...$22 |
Prices are recommended retail, and subject to change, without notice. Call or email us for specials.
