Light and easy to hold, these sanding blocks come in four standard sizes and are made from anodised aluminium extrusion. Tungsten carbide strips are then bonded to the flat faces. A truly flat sander, great for straight edges and they will sand a perfect right-angle when placed on their side.
Sanding Block 140mm. 140mm x 50mm Fine one side, Coarse the other
$33.00
Sanding Block 2800mm. 280mm x 50mm Fine one side, Coarse the other.
$50.00
Sanding Block 560mm. 560mm x 50mm Fine one side, Coarse the other.
Wedge Block 140mm x 50mm Fine one side, Coarse the other.
$35.00
These flexible strips (FXT) are made from tungsten carbide welded to thin steel sheets. This enables them to be cut and bent easily to any desired profile
FXT-103.280mm x 50mm fine...$16 FXT-104.280mm x 50mm coarse...$16 FXT-106.140mm x 50mm fine...$13 FXT-107.140mm x 50mm coarse...$13
This sanding block is made from two pieces of plastic that clamp together,trapping the sanding sheets listed below. The ends of the sheets are bent round the plastic base
(Note: Sanding sheet shown is not included with holder SH-HOLDER .Base area 120mm x 70mm...$17
SH-120XC. Sheet extra coarse grit....$15 SH-120C. Sheet coarse grit...$15 SH-120M. Sheet medium grit...$15 SH-120F. Sheet fine grit...$15
Spar Slotters These tools have the grit on ONE face only. This means they will cut perfect slots.
SP3F Spar Slotter 3mm x 140mm Fine...$16 SP3C Spar Slotter 3mm x 140mm Coarse...$16
SP6F 6mm x 140mm Spar Slotter fine...$17 SP6C 6mm x 140mm Spar Slotter Coarse...$17
SP9F Spar Slotter 9mm x 140mm fine...$18 SP9C Spar Slotter 9mm x 140mm Coarse...$18
The pages are best viewed with Internet Explorer 6 or newer. Screen resolution should be at least 1024 x 768.